Managing Servers - Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual

NOTE: After rolling back with swid2, iscurrent and isnext are true.

Managing servers

Managed servers are managed with the /admin1/system[n] target.
You can begin managing servers after a server has been added under the Units tab in the web
interface and a target exists in the map.
Showing the properties of a managed server
The /admin/system[n] target is the service processor on the managed server. You can view the
service processor's IP address, name and other properties. The /admin/system[n]/
memberofcollection target is the association of /admin/system[n]. With the association, you can
find in which group the target is in.
To view the properties of a managed server:
1. To view the service processor's IP address, enter the show command followed by the /admin/
system[n] target.
/admin1-> show /system3 OtherIdentifyingInfo
/admin1/system3
properties
InstanceID = Avct_MergePoint:swid2
isnext = true
isinstalled = true
IsEntity = true
iscurrent = true
verbs
cd
load
set
show
subtargets
properties
OtherIdentifyingInfo[0] =
OtherIdentifyingInfo[1] = ******
OtherIdentifyingInfo[2] = 172.26.26.172
OtherIdentifyingInfo[3] = Unmanaged
Chapter 8: Using SMASH Command Line Management 139