Table F.3: Default Command Templates - Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual

10. In the Command Template drop-down menu, the new template is automatically added and is
included in the list of command templates that you can assign to a profile.
11. Assign the new template to the profile.
NOTE: The new template is automatically added to the Command Template drop-down menu the next time an
administrative user logs into the web interface.
To use the sptemplate utility to test a template:
When sptemplate is used to test a template, extra debugging information is provided to report on
commands sent to and received from the target device.
1. Log into the console as an administrator.
2. Select Test from the menu.
3. At the prompt, confirm that you want to continue by entering
4. Select a template to test. A list of configured target devices appears.
5. Select a target device to test the template against. The editor runs the commands in the
specified template and returns debugging information that you can record for making
command changes in a new template.
6. Choose a command to test.
7. At the prompt, enter the username and password you used when logging into the MergePoint
SP manager.
8. Go to To use the sptemplate utility to create a new template:.
Default command templates
Default Command Templates lists the default command templates and describes the types of target
devices to which they apply.

Table F.3: Default Command Templates

Template
alom.default
blade_center.default
devconsole.default
drac_mc.default
drac3.default
drac4.default
drac5.default
hp_blade_system.default
Type of Target Device
Sun ALOM type target devices
IBM BladeCenter type target devices.
Target devices that support access to their consoles.
Dell DRAC MC target devices.
DRAC III type target devices.
DRAC IV type target devices.
DRAC V type target devices.
HP BladeCenter target devices.
Appendices
. A list of templates appears.
y
177