Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual page 124

110 MergePoint Service Processor Manager SP53XX Installer/User Guide
Table 7.2: Parameters that Work with the CLI add Command (Continued)
Parameter Level 1 Parameter Level 2
cd
The cd command sets a parameter prefix for subsequent commands. The prompt then changes to
indicate the prefix. Entered by itself, cd returns to the top level.
Synopsis
cd [parameter(s)]
Examples
cli> cd network
network> get hostname
dingo
user
group
server-groups
global role
What It Configures (Syntax)
Add the name of a user authorized to access the
appliance.
Synopsis: add spmanager user <username>
Example: add spmanager user user11
NOTE: To set a device or a role to the user, see the
set command for the following parameter:
spmanager user on page 122.
Add the name of a user group.
Synopsis: add spmanager group <group_name>
Example: add spmanager group g1
NOTE: To specify a device or a user to access the
group, see the set command for the following
parameter: spmanager group on page 121.
Add the name of a server group.
Synopsis: add spmanager server-groups
<groups_name>
Example: add spmanager server-groups
MergePoint2.
NOTE: To add a device into a server group, see the
set command for the following parameter spmanager
server on page 122.
Add an appliance user role.
Synopsis: add spmanager global role <role_name>
Example: add spmanager global role role_aa
NOTE: To set the privilege of the global role, see the
set command for the following parameter:
spmanager global role on page 122.