Managing Default Users (Admin Users Only); Table 2.4: Default Service Processor Usernames And Passwords - Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual

To modify a user SP profile:
1. Click Targets - SP Profiles.
2. In the User SP Profiles list, click the name link for the SP profile you wish to modify and enter
the new information.
3. Click Apply.

Managing Default Users (Admin users only)

To perform management operations through a MergePoint SP manager, a username and password
are required to access the target device. To simplify the authentication process, you may configure
a default username and password for specific target devices. When a management operation is
requested, the MergePoint SP manager searches the entire list of default usernames to see if there is
an appropriate one for accessing the target device. You may create multiple entries of the same
username with a different password for each. One preset username and password for each type of
target device is created by default.

Table 2.4: Default Service Processor Usernames and Passwords

Type
IPMI 1.5
IPMI 2.0
IBM RSA II
IBM BladeCenter
DELL DRAC 3
DELL DRAC 4
DELL DRAC 5
DELL 10G
HP IPMI
HP iLo1
HP iLo2
SUN iLom
SUN Alom
Fujitsu Siemens iRMC
DELL DRAC MC
HP BladeCenter
Username
admin
admin
USERID
USERID
root
root
root
root
admin
admin
Administrator
root
admin
admin
root
Administrator
Chapter 2: Installation and Setup
Password
admin
admin
PASSW0RD
PASSW0RD
calvin
calvin
calvin
calvin
admin
opensource
opensource
changeme
admin
admin
calvin
admin
33