Quit; Rename; Revert - Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual

114 MergePoint Service Processor Manager SP53XX Installer/User Guide
cli> commit
cli> quit

quit!

The command closes the CLI utility and discards any uncommitted changes.
quit

rename

The command renames parameter. Depending on the parameter, this may result in a whole
rename
subtree of parameters being moved. For instance, if an IP address in the host list is changed, all
parameters associated with that host (name, alias) are moved under the new name.
Synopsis
rename parameter(s) value(s)
Examples
cli> get network hosts 192.168.160.11
network hosts 192.168.160.11 name: fruitbat
alias
cli> rename network hosts 192.168.160.11 192.168.160.222
OK
cli> get network hosts 192.168.160.11
ERR No such file or directory
cli> get network hosts 192.168.160.222
name fruitbat
alias

revert

The command discards any changes and reverts to previously committed state.
revert
Synopsis
revert
Examples
cli> get network hostname
dingo
cli> set network hostname kookaburra
OK
cli> get network hostname