List; Quit | Exit - Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual

network interface eth0 gateway: none
network interface eth0 mtu: 1500
network interface eth0 alias
cli>
NOTE: If you make a change but do not commit it (see commit on page 111), the configuration files are not
updated. The get
value stored in the affected configuration file.

list

The command lists all available parameters. With no parameters listed, the whole parameter
list
tree is displayed. If parameters are specified, the corresponding subtree is displayed.
Synopsis
list parameter(s)
Example
cli> list network hosts
127.0.0.1
127.0.0.1 name
127.0.0.1 alias
192.168.160.10
192.168.160.10 name
192.168.160.10 alias

quit | exit

The command closes the CLI utility. (
quit
been committed, the user is prompted to commit the changes or quit without committing.
Synopsis
quit
Example
cli> set network hostname frutabaga
OK
cli> quit
You have made changes but haven't committed them yet.
To commit the changes, use the "commit" command.
To revert all changes and quit without committing, use "quit!".
command shows the changes that are currently stored in the RAM memory, not the actual
Chapter 7: Using the CLI Utility
also quits the CLI utility.) If changes have not
Ctrl+d
113