Avctmp_Discoveryserviceaccessbysap Associations Commands; Power Management Service Command - Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual

150 MergePoint Service Processor Manager SP53XX Installer/User Guide
mName="MergePoint",CreationClassName="AvctMP_DiscoverySAP",Name="oemavoce
nt_discoverysap1" -h <appliance_IPaddress> -u wsman -p secret -y basic -k
oemavocent_startmode="manual"
NOTE: The start mode value should be either "manual" or "automatic".
NOTE: Trying to modify properties other than the above four can result in an error message.
To start the automatic discovery:
Enter the following command:
wsman inovke http://sblim.sf.net/wbem/wscim/1/cim-schema/2/
AvctMP_DiscoverySAP?SystemCreationClassName="AvctMP_ComputerSystem",Syste
mName="MergePoint",CreationClassName="AvctMP_DiscoverySAP",Name="oemavoce
nt_discoverysap1" -h <appliance_IPaddress> -u wsman -p secret -y basic -a
start
NOTE: If the automatic discovery is already running, then the return value is 2.
To stop the automatic discovery:
Enter the following command:
wsman inovke http://sblim.sf.net/wbem/wscim/1/cim-schema/2/
AvctMP_DiscoverySAP?SystemCreationClassName="AvctMP_ComputerSystem",Syste
mName="MergePoint",CreationClassName="AvctMP_DiscoverySAP",Name="oemavoce
nt_discoverysap1" -h <appliance_IPaddress> -u wsman -p secret -y basic -a
stop
NOTE: If the automatic discovery is already stopped, then the return value is 2.

AvctMP_DiscoveryServiceAccessBySAP Associations commands

To enumerate AvctMP_DiscoveryServiceAccessBySAP associations:
Enter the following command:
wsman enumerate http://sblim.sf.net/wbem/wscim/1/cim-schema/2/
AvctMP_DiscoveryServiceAccessBySAP -h <appliance_IPaddress> -u wsman -p
secret -y basic

Power management service command

To enumerate AvctRT_PowerManagementService instances:
Enter the following command:
wsman enumerate http://sblim.sf.net/wbem/wscim/1/cim-schema/2/
AvctRT_PowerManagementService -h <appliance_IPaddress> -u wsman -p secret
-y basic