Commit; Delete - Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual

network> set hostname kookaburra
OK
network> cd interface eth0
network interface eth0> set <tab><tab>
address
network interface eth0> set address 192.168.160.10 netmask 255.255.255.0
OK
network interface eth0> cd ..
network interface> cd eth1
network interface eth1> set address 192.168.50.10
OK
network interface eth1> cd
cli>

commit

The command saves changes in configuration files and creates a compressed copy of the
commit
configuration files in a backup directory.
NOTE: If you make a change but do not commit it, the configuration files are not updated, and your changes will
be lost after the next reboot.
Synopsis
commit

delete

The delete command deletes the last parameter in the command line. Deleting certain parameters
deletes associated parameters. For instance, if an IP address is deleted from the host list, other
parameters associated with a host (name, alias) are also deleted.
Synopsis
delete parameter(s)
Some parameters cannot be deleted. Parameters that can be added can be deleted.
Examples
cli> get network hosts 192.168.160.11
network hosts 192.168.160.11 name: fruitbat
network hosts 192.168.160.11 alias: fbat
cli> delete network hosts 192.168.160.11
alias broadcast
Chapter 7: Using the CLI Utility
gateway method
111
mtu netmask