Chapter 9: Using Ws-Management; Ws-Man Commands For The Mergepoint Sp Manager; Automatic Discovery Service Command - Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual

CHA PTER
9
As an alternative to the web interface, CLI or CLP, the Web Service for Management (WS-MAN)
service can be used to remotely access and control services processors connected to the MergePoint
SP manager.
WS-MAN commands for the MergePoint SP manager can be entered using the Openwsman CLI,
which is launched from a remote computer to the MergePoint SP manager. Openwsman CLI is a
command line client of openwsman and provides an easy way to access the WS-MAN service.
Software requirements for Openwsman CLI:
• Visit www.openwsman.org/project/wsmancli to download the openwsman and wsmancli files.
• Compile and install the openwsman and wsmancli files on your computer.
NOTE: Visit http://www.dmtf.org/standards/wbem/ for more information about the WS-MAN specification.

WS-MAN Commands for the MergePoint SP Manager

This section describes the WS-MAN commands supported by the MergePoint SP manager.

Automatic discovery service command

To enumerate AvctMP_DiscoveryService instances:
Enter the following the command:
wsman enumerate http://sblim.sf.net/wbem/wscim/1/cim-schema/2/
AvctMP_DiscoveryService -h <appliance_IPaddress> -u wsman -p secret -y
basic ""
To get AvctMP_DiscoveryService instances:
Enter the following the command:
wsman get http://sblim.sf.net/wbem/wscim/1/cim-schema/2/
AvctMP_DiscoveryService?SystemCreationClassName="AvctMP_ComputerSystem",S
ystemName="MergePoint",CreationClassName="AvctMP_DiscoveryService",Name="
oemavocent_discoverysrv" -h <appliance_IPaddress> -u wsman -p secret -y
basic ""
Using WS-Management
147