N8104-84 1000Base-Sx Adapter - NEC Express5800/340Hb-R N8800-047F User Manual

N8104-84 1000BASE-SX Adapter

Consult your sales personnel for details when purchasing this hardware.
IMPORTANT:
Note the following about this product:
It is advisable to add this product to such environment that each system is used for a
different purpose (ex. system line, maintenance, monitoring) and multiple accesses do not
occur simultaneously.
If there are multiple accesses, the processing power and transmission speed may be
somewhat affected.
Slots to install the board
N code
N8104-84 1000BASE-SX
Adapter
√: Can be installed. –: Cannot be installed.
IMPORTANT:
The server can contain up to six sets of PCI boards: optional PCI board
(N8804-001P1, N8104-84, or N8104-103) and internal LAN controller (100BASE-TX or
1000BASE-SX).
Installation of driver
The NEC Express5800/ft series uses a pair of N8104-84 boards in duplex mode.
After installing the OS, follow the steps below to install a driver before setting a dual
configuration:
IMPORTANT:
installation. If you use the floppy disk provided with the network card, it will not
operate properly. (PROSetII will not start.)
NOTE:
Administrator or a member of the Administrators group.
PCI slot for
PCI module
Name
Group 1
#1 #2 #3 #1 #2 #3 #1 #2 #3 #1 #2 #3
– √ √ – √ √ √ √ √ √ √ √ Each PCI module can
Please use the CD-ROM for NEC Express5800/ft series for
To perform this procedure, you have to log on the system as an
PCI slot for
expansion PCI
module
Group 2 Group 1
Option 8-23
Remarks
Group 2
contain one N8104-84
only.
Each expansion PCI
module can contain
two N8104-84.