NEC Express5800/340Hb-R N8800-047F User Manual page 144

4-20 System Configuration
Get Default Value
Select this option to restore all default values of the SETUP utility.
The following screen appears:
Select "Yes" and press Enter to restore default values. Select "No" and press Enter to
return to the Exit menu screen.
IMPORTANT:
value. Check all setting values before restoring the default value.
Load Previous Values
Select this option to discard the current configuration data and restore the previous
configuration data.
The following screen appears:
Select "Yes" and press Enter to discard the current configuration data and restore the
previous one.
Save Changes
Select this option to save the current configuration data into the CMOS memory and stay
on the SETUP utility.
The following screen appears:
Select "Yes" and press Enter to save the current configuration data into the CMOS
memory.
The default value slightly differs from the factory-set