NEC Express5800/340Hb-R N8800-047F User Manual page 240

6-8 Maintenance
6.
Select [System Diagnostics] and then select [System Diagnostics (Consumer)].
The system diagnosis (consumer) starts and will be completed in approximately three
minutes.
When the diagnosis is completed, the following appears on the screen of the display unit.
System bar:
Title bar:
Test window: Shows the progress or result of diagnostics.
Target scope: A cursor to select the test window. Use the cursor keys on the keyboard to
If an error is detected during the system diagnostics, the title bar turns in red, and error
information is displayed in red characters. Note down the error message and contact your
sales agent.
7.
Press Q and select [Reboot] from the menu.
The server restarts and the system is started from the NEC EXPRESSBUILDER.
8.
Exit the NEC EXPRESSBUILDER, and remove the CD-ROM from the CD-ROM drive.
9.
Power off the server and unplug the power cord from the receptacle.
10.
Reconnect all the LAN cables to the server.
11.
Plug the power cord.
This completes the system diagnostics (consumer).
System bar
CURSOR: Select Window ENTER: View Window
Test window
Target scope
Shows information including time of progress during the diagnostics. Upon
completion of the diagnostics, descriptions on key operations to navigate
the window are shown.
Shows items for diagnosis. If an error is detected, the bar is indicated in
red.
move it to another test window. (Move the target scope to a desired
window and press Enter. Now you can view detailed information on the
selected window. To return to the previous window, press Enter once
again.)
Some system configurations do not display the target scope but change the
color of the test window's frame.
Title bar
P: Log Out Q: Quit