NEC Express5800/340Hb-R N8800-047F User Manual page 81

Configuring and Breaking Mirror
This section describes the procedures to configure and break the mirror of hard disk volumes using
Disk Management.
Configuring mirror
Follow the procedures below to configure a volume mirror.
IMPORTANT:
Set mirror to the disks whose Target IDs are identical.
For details, see "Hard Disk Configurations that can be built on the NEC Express5800/ft series
(page 3-3)."
1.
Click [Start] - [Administrative Tools] then [Computer Management].
The [Computer Management] dialog box will appear.
2.
Click [Disk Management] under [Storage] in the console tree.
The [Disk Management] window will appear on the right panel.
3.
Insert a new disk. The disk will appear on the [Disk Management] window.
IMPORTANT:
If the status of the disk is "Not Initialized", right-click the disk and initialize it.
If [Foreign] appears, right-click the disk and execute [Convert to Basic Disk...].
Windows Setup and Operation 3-5