Removing Dual Lan - NEC Express5800/340Hb-R N8800-047F User Manual

Removing dual LAN

TIPS:
To set dual LAN configuration, log on as "Administrator" or a member of the group
"Administrators".
1.
Display the [Intel(R)PROSet II] dialog box by starting one of the start menu modes below:
Standard start menu mode
Click [Intel(R)PROSet II] in [Control Panel] from the [Start] menu.
Classic start menu mode
(1)
(2)
2.
Remove all adapters from Duplication.
Right-click the following adapters on the control tree which is located on the left side
of the [Intel(R)PROSet II] dialog box and select [Remove from Team].
<For on-board >
-
-
<For option board >
-
-
-
You will then see the dialog box on the right of this paragraph. This is because one of
two teamed adapters constituting dual configuration is removed.
Click [Yes], to remove the adapter from Team.
Remove the other adapter in the same way.
Select [Control Panel] from [Settings] of the [Start] menu.
Double-click the [Intel(R)PROSet II] icon.
Stratus emb-82559 10/100 Enet Adapter
Stratus emb-82544GC Copper Gigabit Adapter
Stratus AA-U51500 10/100 Enet Adapter (100BASE-TX)
Stratus AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)
NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)
Windows Setup and Operation 3-37