Options - NEC Express5800/340Hb-R N8800-047F User Manual

OPTIONS

The following table lists options available for NEC Express5800/ft series.
Any other options not described in this table are maintenance parts or the one supported by
customer's request. Ask your service representative for details.
There are two types of options. For CRU (Customer Replaceable Unit), the customer can work with
it. For FRU (Field Replaceable Unit), only our field engineer can work with. For FRU options, ask
your service representative for installation or removal procedure.
IMPORTANT:
Make sure to add options in pair to configure the duplex system. Moreover,
for components to be installed in a module, it is necessary to install the same components in the
same slots (socket) in the module.
Classification
Option
CRU
×
PCI module
√
Hard disk
drive
×
PCI board
×
CPU module
×
DIMM
(memory)
×
Processor
(CPU)
×
Expansion PCI
module
×
PCI board
Add/
Replace
FRU
√
Replace Two PCI modules are factory-installed in NEC
Express5800/ft series.
×
Add/ A PCI module can contain three hard disk drives. One
Replace drive is factory-installed.
See "3.5-inch Hard Disk Drive" in this chapter for
details.
√
Add/ A PCI module can contain three PCI boards. A
Replace factory-installed SMM board is FRU.
For setup of PCI board, see "Setup of Optional PCI
Board" in this chapter.
√
Replace Two PCI modules are factory-installed in NEC
Express5800/ft series.
√
Add/ A CPU module can contain 12 DIMMs (12GB). Four
Replace 512MB DIMMs are factory-installed. Install four DIMMs
in group.
√
Add/ A CPU module can contain four CPUs. Two CPUs are
Replace factory-installed.
√
Two expansion PCI modules are factory-installed in
Replace
NEC Express5800/ft series.
√
Add/ An expansion PCI module can contain three PCI
Replace boards.
For setup of PCI board, see "Setup of Optional PCI
Board" in this chapter.
Option 8-5
Description