SCSI Bus Settings
If you put the cursor on "SCSI Bus Settings" with keyboard cursors (↓ and ↑) in the "Configuration
Settings" menu and press Enter, the screen for setting the information on the SCSI bus of the host
adapter appears.
The table below shows the parameters of the setting items and their settings at shipment.
IMPORTANT: The settings can be done in SCSI buses. The settings at shipment are the same
for both SCSI bus 0 and SCSI bus 1.
Submenu item
SCSI Bus SCSI ID
SCSI Bus Reset
SCSI Bus Reset
Delay
SCSI Bus
Termination
Parameter
0, 1, 2, 3, 4, 5, 6, [7], 8, 9, 10,
11, 12, 13, 14, 15
[Enabled]
Disabled
0, 1, 2, 3, 4, [5], 6, 7, 8, 9, 10,
11, 12, 13, 14, 15
Auto
High only
Disabled
[Enabled]
System Configuration 4-27
Description
Select the SCSI ID given to SCSI bus.
Make the reset valid or invalid in SCSI
buses.
Leave this item as factory-set.
Set the termination resistance of SCSI
bus.
[ ]: Factory-set