NEC Express5800/340Hb-R N8800-047F User Manual page 62

2-26 General Description
Expansion PCI Module Status LED
Expansion PCI
Module Status LED
Expansion PCI Module Status LEDs (1 and 2)
The expansion PCI module has two LEDs.
Combined, the two LEDs show the status of the expansion PCI modules:
LED
Red (On)
Red (On) on a module, and
Green (On) on another module
Green (On)
Amber (On)
Off
Expansion PCI Module
Status LED
PCI Slot Status PCI Slot Status
LED (SLOT 1) LED (SLOT 2)
Status / Action
Expansion PCI module is faulty.
Install the Expansion PCI module again. If the same indication
persists, contact your service representative.
Diagnostic test is in progress. Wait for a while.
The Expansion PCI module operates in duplex mode and the
module is in safe state.
The Expansion PCI module operates in simplex mode and the
module is in critical state.
Make the Expansion PCI module being offline to online state. If
the same indication persists, contact your service
representative.
The server is off-powered. Check if the AC power cord is firmly
connected. Also check if the power supply for the system is
properly connected.
PCI Slot Status
LED (SLOT 3)