NEC Express5800/340Hb-R N8800-047F User Manual page 58

2-22 General Description
PCI#1
Status DISK
LED 2 Access
LED
Green Off
(4) Status LED of only PCI module 2 is red
PCI#1
Status DISK
LED 2 Access
LED
Amber Amber
Amber Amber
Off Off
Off Off
PCI#2
Status DISK
LED 2 Access
LED
Off Off The PCI module 1 is
performing diagnosis
(Diag).
AC power is not
supplied to the PCI
module 2.
PCI#2
Status DISK
LED 2 Access
LED
Off Off The PCI module 2 is on
standby (The PCI
module 2 has not been
powered on yet.)
The PCI module 1
operates in simplex
mode.
Green Off The PCI module 2 is
performing diagnosis
(Diag).
The PCI module 1
operates in simplex
mode.
Off Off Only the PCI module 2
is on standby (AC
power is supplied
through the cord, but
the system has not
been powered on yet.)
AC power is not
supplied to the PCI
module 1.
Green Off The PCI module 2 is
performing diagnosis
(Diag).
AC power is not
supplied to the PCI
module 1.
Description
Wait for the OS to start. After
the OS starts, check the
status LEDs and then take the
appropriate actions.
If the problem persists,
contact your sales agent.
Description
Start the PCI module 2 from ft
server utility (See
"Maintenance of NEC
Express5800/ft series" in
Chapter 5).
Remount the PCI module 2.
If the problem persists,
contact your sales agent.
Wait for the PCI module 2 to
start. When the PCI module 2
starts and duplex mode is
established, the indications
will return to normal.
Check if the power cord is
connected correctly.
Check the condition of
breaker and UPS.
Check if the power unit is
connected correctly.
Remount the PCI module 1.
If the problem persists,
contact your sales agent.
Wait for the OS to start. After
the OS starts, check the
status LEDs and then take the
appropriate actions.
If the problem persists,
contact your sales agent.
Action
Action