Reset And Forced Shutdown; Resetting The Server; Forced Shutdown - NEC Express5800/340Hb-R N8800-047F User Manual

4-32 System Configuration

RESET AND FORCED SHUTDOWN

Read this section if your server does not operate as expected, or if you want to resume all setup
values to those made at shipment.

Resetting the Server

If the server halts before starting the OS, press Ctrl + Alt + Delete. This restarts the server.
IMPORTANT:
reset the server when it is not frozen, make sure that no processing is in progress.

Forced Shutdown

Use this function when an OS command does not shut down the server, the POWER switch does not
turn off the server, or resetting does not work. Press and hold the POWER switch on the server for
over four seconds.
To turn on the power back again, wait approximately 30 seconds after turning off the power (forced
shutdown).
IMPORTANT:
and turn off the power again in the normal way.
Resetting the server clears the DIMM memory and the data in process. To
Press this button for at least four seconds.
If the remote power-on feature is used, cycle the power once to load the OS,