NEC Express5800/340Hb-R N8800-047F User Manual page 46

2-10 General Description
1 Serial port 1 (A) connector
Connected to a device that has a serial interface. For maintenance use only.
2 Serial port 2 (B) connector
Connected to a device that has a serial interface. For maintenance use only.
3 AC inlet A (for Group 1)
PC socket for plugging a power cord (for Group 1). If you desire to make the PCI module for
Group 1 primary, use this inlet to connect the power cord first.
4 USB connector 1 (left)/USB connector 2 (right)
Connected to devices that support the USB interface.
5 Monitor connector
Connected to the display unit.
6 AC inlet B (for Group 2)
PC socket for plugging a power cord (for Group 2). If you desire to make the PCI module for
Group 2 primary, use this inlet to connect the power cord first.
7 SCSI connector
Used for connecting external SCSI devices.
8 RJ-45 (LAN) controller
Not used in this system.
9 RJ-11 (Modem) controller
Not used in this system.
10 SMM board status LED (green/amber)
See "LEDs" in this chapter for details.
11 SMM board status LED (red)
See "LEDs" in this chapter for details.
12 LINK/ACT LED
See "LEDs" in this chapter for details.
13 LAN connector 1
A connector for 1000BASE-T, 100BASE-TX, and 10BASE-T. Connected to the network
system on LAN.
14 1000/100/10 LED
See "LEDs" in this chapter for details.
15 LINK/ACT LED
See "LEDs" in this chapter for details.
16 LAN connector 2
A connector for 100BASE-TX and 10BASE-T. Connected to the network system on LAN.
17 100/10 LED
See "LEDs" in this chapter for details.
18 PCI board slot status LED (Slot3)
See "LEDs" in this chapter for details.
19 PCI board slot status LED (Slot2)
See "LEDs" in this chapter for details.
20 PCI board slot status LED (Slot1)
See "LEDs" in this chapter for details.
21 PCI module status LED 2
See "LEDs" in this chapter for details.
22 PCI module status LED 1
See "LEDs" in this chapter for details.