NEC Express5800/340Hb-R N8800-047F User Manual page 154

4-30 System Configuration
Scan SCSI Bus
If you select "Scan SCSI Bus" from the "Fast!UTIL Options" menu, the list of devices connected to
each SCSI bus is displayed in the order of SCSI IDs. The information to be displayed includes the
device manufacturer, product name, and firmware revision.
SCSI Disk Utility
If you select "SCSI Disk Utility" from the "Fast!UTIL Options" menu, the utility menu appears
which is used to format or verify the connected SCSI devices.
IMPORTANT:
Devices can be processed in SCSI buses and SCSI IDs. Be careful not to forget the
selected bus and ID.
When performing low-level format, select [Advanced] – [Monitoring Configuration] –
[Option ROM Scan Monitoring] and choose "Disabled" in BIOS setup utility. See
"SYSTEM BIOS ~ SETUP ~" (page 4-2) for details of the setting.
The selection of "Continue With Format" in "Low-Level Format" causes all data in disks
to be lost.
If you select "Select Host Adapter" from the "Fast!UTIL Options" menu, the list of the
host adapters installed in the main system is displayed. Select an adapter to change its
settings.
Low-Level Format
Formats physically the device selected in "Continue With Format". If you select "Do Not
Format Disk", the menu displayed just before appears again.
Verify Disk Media
Verifies the device selected in "Continue With Verify". If you select "Do Not Verify
Media", the menu displayed just before appears again.
Select Different Disk
Selects another SCSI device on the same SCSI bus.
Select Host Adapter
If you select "Select Host Adapter" from the "Fast!UTIL Options" menu, the list of the host adapters
installed in the system is displayed. Select an adapter to change its settings.
IMPORTANT: The adapter "QLA12160 Ultra3 2400" is used for built-in hard disk.
The utility menu appears which is used to format or verify the connected SCSI devices.