Scsi Bios ~ Fast!Util - NEC Express5800/340Hb-R N8800-047F User Manual

SCSI BIOS ∼ Fast!UTIL ∼
For several settings of the SCSI controller, the SCSI BIOS utility "Fast!UTIL" is used.
The SCSI BIOS utility can be started by simple key manipulations during execution of POST
without use of a special start disk.
The SCSI BIOS built in the server is set to the optimum at the shipment. Accordingly, the SCSI
BIOS may not be changed by using this utility.
IMPORTANT:
Leave the settings for the SCSI controller to which built-in hard disks are connected as they
are at shipment.
The controllers installed in each module must be configured individually.
Fast!UTIL of the latest version is installed in the NEC Express5800/ft series. Accordingly,
the setting screen may be different from that described in this document. See the online help
or contact your service representative for the setting items different from those in this
document.
System Configuration 4-21