Supplement - NEC Express5800/340Hb-R N8800-047F User Manual

Supplement

Before using backup devices:
If any of following backup devices is used for internal SCSI connector of NEC Express5800/ft
series, you may need to update your firmware for backup devices.
List of backup devices and firmware
Model #
N8551-29F
N8151-39F
N8151-45F
N8151-46F
N8151-41AF
All tape devices need to update the firmware if the firmware revision is older than above.
IMPORTANT:
Request a maintenance engineer of your service representative having the expert
knowledge on the server to install or remove the backup devices and updating of firmware.
If your backup device is a built-in type, you need to purchase a SCSI cable and device
expansion unit separately. For external device, only SCSI cable is required additionally.
Contact your service representative for details.
NEC Model Name
Built-In AIT Auto Loader
Built-In DAT Auto Loader
Built-In DAT
Built-In AIT
Built-In AIT
Option 8-27
Latest Firmware Revision
L1nb
L2n4
02n9
01nm
01nm