System Diagnostics (Consumer); Test Items; Startup And Exit Of System Diagnosis (Consumer) - NEC Express5800/340Hb-R N8800-047F User Manual

SYSTEM DIAGNOSTICS (CONSUMER)

The System Diagnostics (Consumer) runs several tests on the server.
Select [Tools] → [System Diagnostics] in the NEC EXPRESSBUILDER to diagnose the server.

Test Items

The following items are tested in system diagnostics (consumer).
Memory
CPU cache memory
Hard disk used as a system
Onboard LAN controller
IMPORTANT:
remove the LAN cable. Executing the system diagnostics with the LAN cable
connected, the network may be influenced.
TIPS:
On checking the hard disk, no data is written into the disk.

Startup and Exit of System Diagnosis (Consumer)

Procedures to start the diagnostic program are as follows:
1.
Shutdown the OS, and power off the server. Then, unplug the power cord.
2.
Disconnect all the LAN cables from the server.
3.
Plug the power cord and power on the server.
4.
Use the NEC EXPRESSBUILDER CD-ROM to reboot the server.
The following menu appears when the server is started using the NEC
EXPRESSBUILDER.
5.
Select [Tools].
When executing the system diagnostics (consumer), make sure to
Maintenance 6-7