NEC Express5800/340Hb-R N8800-047F User Manual page 258

7-14 Troubleshooting
Failure in CPU module duplication and the following event is logged:
→
If the simultaneous replacement of the CPU and PCI modules causes the CPU and
PCI modules to control duplication, the CPU module duplication may fail with the
following message saved in the system event log. If so, the system can be
recovered from the failure starting the CPU module with ft server utility or by
reinserting the CPU module.
Source:
ID:
Description: Diagnostics failure of 2: 'CPU Get Chipset Info' (0xf026,0x0,0x0).
EvntAgnt-related logs are recorded in the application event log:
→
The event does not affect the system (it also does not affect the SNMP service).
You need not to cope with this event.
Source:
ID:
Description: TraceFileName parameter not located in registry;
Source:
ID:
Description: TraceLevel parameter not located in registry;
sra_ssn-related logs are recorded in the application event log:
→
Although the following log may be recorded in the application event log when
starting the system, there is no real problem on operation. (In the description, X
represent alphanumeric characters.)
Source:
ID:
Description: Authorization failed to ftSAA XXX.XXX.X.X
Source:
ID:
Description: Retry starting for ftSAA XXX.XXX.X.X host log connection.
Source:
ID:
Description: Add Host Log entry failed to ftSAA SMMX.
Source:
ID:
Description: Retry starting for RPC server initialization.
srabid
16474
EvntAgnt
1003
Default trace file used is.
EvntAgnt
1015
Default trace level used is 32.
sra_ssn
10319
Error=0xXXXXXXXX.
sra_ssn
10336
sra_ssn
10320
sra_ssn
10338