NEC Express5800/340Hb-R N8800-047F User Manual page 130

4-6 System Configuration
Available options in the Main and descriptions are listed below.
Option
System Time
System Date
Primary Master
Primary Slave
System Memory
Extended Memory
Boot-time
Diagnostic Screen
Summary screen
You can access the Keyboard Features submenu from Main menu.
Select the Keyboard Features menu and press Enter to display its submenus.
IMPORTANT:
conditions:
- After transporting the equipment
- After storing the equipment
- After the equipment halt under the conditions which is out of the guaranteed environment
conditions (Temperature: 10 to 35C°, Humidity: 20 to 80%).
Check the system clock once in a month. It is recommended to operate the system clock using
a time server (NTP server) if it is installed on the system which requires high level accuracy. If
the system clock goes out of alignment remarkably as time goes by, though the system clock
adjustment is performed, contact your sales agent.
Parameter
HH:MM:SS
MM/DD/YYYY
–
–
–
–
[Disabled]
Enabled
[Disabled]
Enabled
Check and adjust the system clock before operation in the following
Description
Specify the current time.
Specify the current date.
Indicates device type connected to
IDE (Primary master). (View only)
Indicates device type connected to
IDE (Primary slave). (View only)
Indicates the total size of the base
memory (view only).
Indicates the total size of the
extended memory (view only).
Specify whether to display the Power
On Self-Test (POST) screen at
start-up.
Specify whether to display the system
devices detected at start-up.
Your Setting
[ ]: Factory-set