NEC Express5800/340Hb-R N8800-047F User Manual page 122

3-46 Windows Setup and Operation
change as follows. Below denotes that the only one expansion PCI module is operating.
[Indications of status LEDs]
1 Expansion PCI module status LED1
2 Expansion PCI module status LED2
1
* This is an example of stopping the expansion PCI module #1.
2
* When no option board is mounted to the expansion PCI module, the LED illuminates
green. If an option board is mounted, the LED illuminates amber.
3.
Use the ft server utility to restart the stopped expansion PCI module.
In the ft server utility, select the stopped expansion PCI module and click [Up] of [Bring
Up/Bring Down].
Once the expansion PCI module is started, hardware will be diagnosed and then duplicated.
[Indications of status LEDs during diagnosis]
1 Expansion PCI module status LED1
2 Expansion PCI module status LED2
*
When no option board is mounted to the expansion PCI module, the LED illuminates
green. If an option board is mounted, the LED illuminates amber.
[Indications of status LEDs after completion of duplication]
1 Expansion PCI module status LED1
2 Expansion PCI module status LED2
LED
LED
LED
Expansion PCI
module#1
1
(Stopped)*
Red
-
Expansion PCI
module#1
(Diagnosing)
Red
Green
Expansion PCI
module#1
(Operating)
-
Green
Expansion PCI
module#2
(Operating)
-
2
*
Green/Amber
Expansion PCI
module#2
(Operating)
-
*
Green/Amber
Expansion PCI
module#2
(Operating)
-
Green