NEC Express5800/340Hb-R N8800-047F User Manual page 147

Start Procedure
Start Fast!UTIL in the procedure below:
Turn on the power of the server.
1.
The start message appears on a screen in the middle of POST.
Press Q and Ctrl together.
2.
Fast!UTIL is started.
IMPORTANT: Press these keys before message "QLogic Adapter using
IRQ number x" or later appears.
Highlight "Select Host Adapter" using the cursor keys and press Enter.
3.
Fast!UTIL Options
Configuration Settings
Scan SCSI Bus
SCSI Disk Utility
Select Host Adapter
Exit Fast!UTIL
System Configuration 4-23