Table of Contents
Advertisement
Polling to Receive at a Preset Time
Follow this procedure to set the unit to poll another fax unit at a preset
time. Polling fax units at preset times allows you to perform document
transactions later at night when the telephone rates are lower.
Before Setting Up Polling at a Preset Time
Before you set up polling at a preset time, make sure you have performed
the following tasks:
The numbers you want to register for dialling must be registered for
one-touch or coded speed dialling buttons. (1 pp. 3-8, 3-24)
When you register the one-touch speed dialling button or coded
speed dialling code, you must turn on OPTIONAL SETTINGS and set
the TX TYPE to POLLING RX. When the other party sets a
subaddress/password, you have to register an ITU-T subaddress
and/or password for the speed dialling entry. (1 pp. 3-12, 3-29)
If you have to poll a number that you use regularly, you should
register it for another speed dialling button, so you can set the ITU-T
subaddress and/or password to match the polling box of the other
party's fax unit and register the second number for preset polling.
Setting Up a Preset Time Polling Box
1.
Press Data Registration.
Data Registration
SELECT AN ITEM
Set
2.
Press Set.
SELECT AN ITEM
Chapter 9
REGISTRATION/SETTING
DATA REGISTRATION
01 DATA REGISTRATION
02 TEL# REGISTRATION
01 USER SETTINGS
02 REPORT SETTINGS
03 TX SETTINGS
04 RX SETTINGS
05 PRINTER SETTINGS
Polling
9-7
Advertisement
Table of Contents
