Table of Contents
Advertisement
Subaddress/Password Sending with Speed Dialling
To use subaddress/password sending with speed dialling, you must first
register the subaddress/password with the fax number registered for
one-touch or coded speed dialling.
Once you have registered the subaddress/password for one-touch or
coded speed dialling, the subaddress/password are entered for you
automatically when you press the one-touch speed dialling button or
coded speed dialling code. (1 pp. 3-8, 3-24)
Follow the same procedure for using speed dialling (1 pp. 3-49, 3-52).
Your subaddress and code will be entered automatically.
Subaddress/Password Sending with the Operation Panel
Buttons
There are limitations on entering the subaddress/password with the
Subaddress and Password buttons on the operation panel. These are:
If you frequently need to use a subaddress/password to send a
document to more than one location, register the number,
subaddress, and password for one-touch or coded speed dialling so
you can use sequential broadcasting.
You cannot use the Subaddress or Password button for one-touch
or coded speed dialling entries that are registered for anything other
than REGULAR TX. (1 pp. 3-16, 3-33)
The password setting is optional but required if the other party has
set a password on their fax unit.
Follow this procedure to send a document with a subaddress/password
entered with the Subaddress and Password buttons on the operation
panel.
Chapter 4
4-59
Sending Documents
Advertisement
Table of Contents
