Direct sending
Use direct sending if the memory is full but you still want to send a
document. Direct sending scans and sends one page at a time. The
document is not scanned into memory, so it takes a little more time to get
your original document back.
Document
The single sheet or stack of papers containing the data you want to send
through or receive from a fax unit.
Document density
The document density settings alter the lightness or darkness of the
documents sent or received. See Density control.
Document guides
Guide the document into the unit for copying or sending.
Document memory list
The memory list shows the documents currently stored in the unit's
memory. Each memory list shows the following:
•
Transaction number for each document
•
How each document was stored
•
Name and number the document was sent to if they are registered for
one-touch or coded speed dialling
•
Number of pages in the document
•
Date and time each document was stored in the memory and when it
will be sent
•
Sender's name (TTI)
•
Errors (if any) that occurred when sending the document
Document tray
Holds documents ejected from the unit after they have been scanned into
memory, copied, or sent by direct sending.
G - 4
Glossary