Table of Contents
Advertisement
9. USER PROGRAM
The conditions of factory settings can be changed according to the use conditions.
9.1 Functions that can be set with the user program
Function
Auto clear time
When a certain time is passed after the completion of copying, this
function returns to the initial state automatically. The time to reach
the initial state can be set in the range of 30 sec to 120 sec by the
unit of 30 sec. This function can be disabled.
Preheat
When the copier is left unused with the power ON, the power
consumption is automatically reduced to about 40Wh/H (* Note).
The time to start this function can be set in the range of 30 sec to
90 sec by the unit of 30 sec. This function cannot be disabled.
When this function is operated, the pre-heat lamp on the operation panel
lights up. To return to the initial state, press any key on the operation panel.
(When the COPY button is pressed, a copy is made after returning to the
initial state.)
Auto shut off
When the copier is left unused with the power ON, the power consumption
timer
is automatically reduced to about 18Wh/H (* Note). The time to start this
function can be set in the range of 2 min to 120 min.
When this function is operated, all the lamps except for the pre-heat lamp
on the operation panel turn off. To return to the initial state, press the
COPY button.
Auto shut off
Used to set or cancel this function
* Note: The power consumption values in preheat and auto shut off may be varied depending on the use conditions.
9.2 Setting the Power Save Modes and Auto Clear Time
1) Press and hold down the light ( { ) and dark (
q
alarm indicators (
2) Use the left copy quantity (
power shut-off timer, 5: auto power shut-off mode). The selected number will blink in the left side
of the display.
Function name
Auto clear time
Preheat
Auto shut off timer
Auto shut off
Note: If a wrong code is entered press the clear key and enter the correct function code.
Y101700-5
Contents
s
p
, t,
and
) blink and "- -" appears in the display.
) key to select a user program number (1: auto clear time, 2: preheat mode, 3: auto
Function code
1
2
3
5
) keys simultaneously for more than 5 seconds until all the
Service Manual
Factory Setting
60 sec
30 sec
5 min
Set
9-1
Advertisement
Table of Contents
