Table of Contents
Advertisement
Memory Sending Using the Automatic Document Feeder
(ADF)
1.
Press FAX to switch to fax mode.
FAX
2.
Prepare the document and load it, face down, in the Automatic
Document Feeder (ADF). (1 p. 4-4)
RESOLUTION
3.
Dial the other party's fax number.
Chapter 4
Be sure to load the document horizontally (x) (A4 size),
otherwise the unit will automatically reduce your document
when sending.
AUTO RX
DOCUMENT READY
=
STANDARD
STANDARD
DENSITY
If necessary, you can adjust the resolution, density, and image
quality for your document. (1 p. 4-17)
You can set the sender's name with the TTI Selector.
(1 p. 4-11)
Use one of the dialling methods described on page 4-21.
AUTO RX
123 4567
=
If you enter the wrong number, press Clear, then enter the
correct number.
If you used speed dialling to dial the number, the unit will
automatically begin scanning the document into memory five
seconds after pressing the button. If you want the unit to
begin scanning without this delay, press Start to scan
immediately. (If you prefer the unit not to scan a document
automatically after five seconds, you can turn this feature off.)
(1 TIME OUT p. 14-18)
21/08 '99
SAT 15:30
TEXT
SHEET
IMAGEQUALITY
BOOK SENDING
21/08 '99
DELETE
Sending Documents
4-23
Advertisement
Table of Contents
