Table of Contents
Advertisement
Access Settings
SET BOX
A two-digit code (00-99) you assign to the box to select it when you need
to scan documents into the box, or to open it to view or change the
settings. The box number and file name appear in printed reports for
reference.
PASSWORD
If you entered a password when you created the memory box, you will
have to enter the password to see the rest of the settings.
(See 02 PASSWORD below in "Main Settings".)
Main Settings
01 FILE NAME
A name you can assign to the memory box to identify it in printed
reports.
02 PASSWORD
A four-digit password you assign to the memory box to protect the
settings from unauthorized access. You must also use this password and
the box number to print documents stored in the memory box. Assigning
a password is optional, but strongly recommended, especially if you
want to keep the memory box setup and the documents you receive
confidential.
03 SUBADDRESS
This is the ITU-T subaddress.
04 TX PASSWORD
The TX password is only used for polling sending. Your TX password
must match the ITU-T password with which the other party calls you. If
they do not match, the other party will not receive your document.
05 RX PASSWORD
Your RX password must match the ITU-T password assigned to
documents that you receive. If the passwords do not match, your unit
will not receive the document.
6-24
Using the Memory Features
Chapter 6
Advertisement
Table of Contents
