Redialling When The Line Is Busy; Manual Redialling; Cancelling Manual Redialling; Automatic Redialling - Olivetti Copia 9916 User Manual

Hide thumbs Also See for Copia 9916:

Table of Contents

Redialling When the Line is Busy

Redialling occurs when the recipient's line is busy or there is no answer,

and your unit redials the number. There are two methods of redialling:

manual redialling and automatic redialling.

To redial the last number dialled using the numeric keypad, press the

Redial button.

To cancel manual redialling, press the Stop button.

If the other party's line is busy or if there is no answer, the unit waits two

minutes and then dials the same number again. This feature is called

After the initial dial attempt, the unit will wait two minutes and try to

dial again. If the second attempt fails, the unit will again wait for two

minutes and make a final attempt to complete the call.

Auto redial can be turned off and on. The number of redialling attempts

and the time interval between attempts can be set up with the auto redial

feature. (1 p. 4-41)

If both redial attempts are unsuccessful, the unit will cancel the

transaction and print an Error TX Report to remind you that the

transmission was not completed. (1 p. 12-7)

Sending Documents