9.
Press Set.
Set
SELECT AN ITEM
10. Refer to the table on the following pages and follow these
guidelines to select and register settings.
n
In order for your settings to be registered, be sure to press Set after
making a selection or entering information.
11. Press Stop to return to standby mode.
Stop
6-28
Using the Memory Features
SETUP FILE
Use the search buttons (d, u) to move vertically through the
settings.
To register a setting or access sub-settings, press Set.
To return to a previous level, press Return.
01 FILE NAME
02 PASSWORD
03 SUBADDRESS
04 TX PASSWORD
05 RX PASSWORD
Chapter 6