Table of Contents
Advertisement
Return
14. To continue registering other coded speed dialling buttons, press
Return and repeat the above procedure from step 6 on page 3-25.
-or-
To finish registering coded speed dialling buttons, press Stop.
Stop
-or-
To perform optional settings, follow the instructions on the
following page, "Optional Settings".
3-28
Speed Dialling
If you want to return to standby mode during any operation,
press Stop.
You can print the coded speed dialling list showing all the
numbers registered for coded speed dialling. Keep it near
your unit so you can refer to it easily when dialling a number.
(1 p. 3-59)
If you have registered several coded speed dialling entries,
you may not be able to register up to 120 digits for the fax/
telephone number because the memory level may be low.
To use coded speed dialling, see "Using Coded Speed
Dialling". (1 p. 3-52)
If you have registered both fax and telephone numbers under
coded speed dialling codes, make sure you keep a record of
codes with fax numbers registered and a record of codes with
telephone numbers registered. If you mistakenly enter a code
containing a telephone number instead of a fax number, the
unit will continually redial the other party in an attempt to get
a reply.
Chapter 3
Advertisement
Table of Contents
