Table of Contents
Advertisement
Use the search buttons (d, u) to select the setting you want.
5.
You can select from the following:
01 STD IMAGE QUAL/EXP
Set the default image quality and exposure for copying. (To set this
setting 1 below)
02 STD ZOOM RATIO
Set the default copying ratio. (To set this setting 1 p. 14-49)
03 STANDARD COPY QTY
Set the default quantity for copying. (To set this setting 1 p. 14-50)
04 FRAME ERASE WIDTH
Set the default frame erase width for copying. (To set this setting
1 p. 14-50)
05 AUTO SORT
Set the default setting for the auto sort feature (OFF or ON). (To set this
setting 1 p. 14-51)
Follow the appropriate instructions below depending on the
setting you selected.
If you selected 01 STD IMAGE QUAL/EXP in step 5 (above):
Set
6.
Press Set.
STANDARD SCAN MODE
IMAGEQUALITY
7.
Press F4 (IMAGE QUALITY) to select the image quality setting you
want to set as the default.
F4
8.
Use F1 (LIGHT) or F3 (DARK) to adjust the density you want to set
LIGHT
DARK
as the default.
F1
F3
14-48
Summary of Important Settings
LIGHT
AUTO EXPOSUR
You can select TEXT, TEXT/PHOTO, or HALFTONE.
You can select from nine levels.
You can also select AUTO EXPOSUR with the F2 button. By
selecting AUTO EXPOSUR, the unit sets the density level
automatically and sets the image quality to TEXT.
TEXT
DARK
IMAGEQUALITY
Chapter 14
Advertisement
Table of Contents
