Table of Contents
Advertisement
How the Unit Operates with Default Settings
There are many minor features that you can change to customise the
operation of the unit. Some of these features are listed in the table below.
The description in the third column is the default setting. In other words,
this is how the unit will operate unless you change the referenced setting.
If your unit is not operating as described, the default may have already
been changed. In such a case you may want to go to the referenced page
to restore the default setting.
General Settings
Feature
Unit Name, Unit
– DATE & TIME
Telephone Number
– UNIT TEL NUMBER are printed at the top and outside of the image
– UNIT NAME
Date format
DATE SETUP
Button press sound
VOLUME CONTROL
KEYPAD VOLUME
Energy Saver
ENERGY SAVER
Language
DISPLAY LANGUAGE The initial display language is English. Other
Offhook alarm
OFFHOOK ALARM
Telephone line
TEL LINE TYPE
* Rotary pulse is for Australia, Malaysia, New Zealand, Ireland, and Hong Kong.
Chapter 14
Setting Name
Your registered identification and fax number
border of every document you send. Your
number is prefixed with the word "FAX".
(1 pp. 2-20, 14-12)
In standby mode, the date is shown in the
format DD/MM 'YY. Two other formats are
available. (1 p. 14-33)
Every time you press a button on the numeric
keypad you will hear a beep. The volume of this
beep can be adjusted or it can be turned off.
(1 p. 14-13)
Energy saver mode is off and will remain
off until you turn it on. (1 pp. 2-36, 14-34)
languages are available. (1 p. 14-33)
If the handset remains off the hook, an alarm
will sound. The volume of this alarm can be
adjusted or it can be turned off. (1 p. 14-13)
Your unit is set to operate on a touch tone*
telephone line. (1 pp. 2-34, 14-13)
Default Description
Summary of Important Settings
14-3
Advertisement
Table of Contents
