Table of Contents
Advertisement
RX password
The ITU-T password set on your unit to match the ITU-T password of all
incoming documents. If your RX password matches the ITU-T password
of the incoming transmission, the document is received. If the password
does not match, the document is not received. The maximum length of
the password is 20 digits and may consist of numbers, spaces, h, and #.
S
Scanning area
The scanning area is smaller than the original document size as a border
is created around the entire document. Documents you send should have
some margin on the sides, the top and bottom. Anything over this margin
cannot be scanned for sending.
Sender's name
Name or company name, your fax number, date, and time the document
was sent to the receiving party are printed on each page you send. The
sender's name, which is your own name can be printed on the
documents that you send. You can register up to 9 sender names that can
be selected with the TTI selector before sending. Your name and fax
number are printed at the top of documents you send.
Sending speed
The rate at which documents are sent over the phone line. See also bps.
Sequential broadcast
Allows you to send one scanned document to up to 210 destinations by
using one-touch speed dialling, coded speed dialling, and regular
dialling. You just dial several numbers to send the document. If you do
this frequently, you should register the numbers for Group dialling.
Smoothing
Even if the image you receive from the other party's fax unit is of poor
quality, your unit will smooth the image to produce a better quality
image.
Stamp
The stamp feature marks documents that have been scanned for
transmission with a yellow circle stamped on the lower left side of the
document.
G-13
Glossary
Advertisement
Table of Contents
