Cancelling Document Transfer
Follow this procedure to delete the transfer setup file and cancel the
transfer settings.
1.
Follow steps 1 to 6 of "Setting Up the Unit for Document
Transfer". (1 p. 5-27)
Use the search buttons (d, u) to select 03 DELETE FILE.
2.
SELECT AN ITEM
Set
3.
Press Set to delete the file.
4.
Press Stop to return to standby mode.
Stop
5-36
Receiving Documents
TRANSFER
If you have registered a password, use the numeric keypad to
enter the four-digit password, then press Set.
01 SETUP FILE
02 CHANGE DATA
03 DELETE FILE
Chapter 5