Returning to Full Power Mode
The unit returns to full power mode when
you set a document for copying or sending,
you receive a document,
a report is printed out automatically,
you use the telephone connected to your unit, or
you press the Energy Saver button.
n
The Energy Saver button can only be used to return the unit to full
power mode. It cannot be used to enter energy saver mode.
When energy saver mode is enabled and the unit is set to receive
automatically, the telephone connected to the unit will ring. If you do
not want the telephone to ring, turn the volume off on the telephone.
Chapter 2
2-39
Getting Started