Table of Contents
Advertisement
Polling transmission
Polling is when one fax unit requests another fax unit to send a
document. This is useful when the sending party, the party with the
original document, is not in the office, but the document must be sent
out. The receiving party dials the fax unit holding the original and
requests that it be sent. In other words, the receiver always polls the
sender. Before using the polling feature, you have to set up polling boxes.
Printable area
The area of the document that can actually be reproduced and printed on
the recording paper by the receiving unit. The printing area is smaller
than the paper.
Pulse
See Rotary pulse.
R
Reduction mode
The unit's automatic feature that slightly reduces the received image to
allow room at the top of the page for the sender's ID information. You
can also reduce the size of large incoming documents using the RX
REDUCTION option.
Registering
A process by which you place fax or telephone numbers and names in the
unit's memory for automatic dialling so that you can save time dialling
frequently called destinations.
Regular dialling
Dialling a number with the numeric buttons. Use regular dialling to dial
a number that is not registered for any of the automatic dialling methods.
Relay broadcast
See Relay sending.
Relay sending
Also called relay broadcast. You can send a document once to a fax unit in
a distant location and then have that fax unit relay your document to
several other destinations in the same area.
G-10
Glossary
Advertisement
Table of Contents
