Example For The Selection Of Operating Functions And Branching To Other Menus - Siemens Sinumerik 810T User Manual

2 Operation
2.3.5 Branching to operating functions within an operating mode
2.3.5.1 Example for the selection of operating functions and branching
to other menus
To select and branch to other menus, you simply use the 5 softkeys (2.1.1.1) under the CRT.
Example:
(( 810T))
(( Bild 3 von Druckerei
einmontieren
((Foto - Nr. 810T/11 einmontieren))
((Foto - Nr. 810T/12 einmontieren))
2-44
Basic CRT display with the
selected operating mode, e.g.
"AUTOMATIC".
A menu of 5 selectable
operating functions is shown.
You wish, for example, to select the
"PART PROGRAM" function :
Operate the appropriate softkey !
The "PART PROGRAM" func-
tion in "AUTOMATIC" mode is
shown on the CRT display.
Another menu of 5 more
selectable functions is shown.
You wish, for example, to select the
"EDIT" function:
Operate the appropriate softkey !
The function selected ("EDIT")
in the "PART PROGRAM" menu
in "AUTOMATIC" mode is
shown on the CRT display.
The menu shows a branch to 3
new functions.
etc.
© Siemens AG 1990 All Rights Reserved
11.90
6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)