2 Operation
2.3.3 Selection of operating modes
Further selection:
REFPOINT mode (traverse to reference point)
Operate the
Operate the ETC key
REF-
POINT
You operate this softkey.
The basic display for "REFPOINT" mode is shown on the CRT display.
2-40
key on the machine control panel.
under the CRT display twice.
>
© Siemens AG 1990 All Rights Reserved
09.91
The menu
shows you the
function of the
softkey.
6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)