Table of Contents
Advertisement
2 Operation
2.1.1 SINUMERIK 810T operator interface with integrated machine control panel
"Key assignment" display
•
The yellow LED is bright:
When the lower symbols of all the double-function keys on the
Address/numerical keyboard (see Section 2.1.1.3) are active:
The lower character of the operated double-function key is shown in
the input line (see Section 2.1.1.1).
•
The yellow LED is extinguished:
When the upper symbols of all the double-function keys on the
Address/numerical keyboard are active:
The upper character of the operated double-function key is shown in
the input line.
•
Both display states:
are automatically switched over by the NC control.
•
Using the key
2-6
yellow LED extinguished
yellow LED bright.
on the Address/numerical keyboard
(see Section 2.1.1.3), you can also
switch over "manually".
© Siemens AG 1990 All Rights Reserved
09.91
6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)
Hide quick links:
Advertisement
Table of Contents
