11.90
5
Maintenance
5.1
Operating data
Humidity content
to DIN 40040
Air pressure
Shockproof, dustproof and waterproof
to DIN 40050:
–
Operator panel
–
External machine control panel
5.2
Handling the modules
Therefore, please pay attention to the following guidelines:
• Electronics modules must not be touched unless it is absolutely vital for work to
be done.
• Before touching a module, any static in the body must be discharged. The
easiest way to do this is by touching a conductive, earthed part of the structure
(e.g. bare metal parts of the cubicle, socket earth contact).
• Modules should not be brought into contact with materials that are good
insulators (e.g. plastic foil, insulated desk tops, clothing made from synthetic
fibres).
• Modules should only be laid on conductive surfaces.
• Modules should only be removed or replaced with the power off.
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810T, GA3 (BN)
Modules/components carrying this warning symbol (yellow
hand on a black triangle, with stripe through) are suscep-
tible to electrostatic discharge.
6ZB5 410-0EP02
5 Maintenance
5.1 Operating data
F
860 to 1080 hPa
IP 54
IP 54
5-1