Influencing The Program - Siemens Sinumerik 810T User Manual

3 Operating Sequences
3.2.3 Influencing "AUTOMATIC" operation

3.2.3.1 Influencing the program

With the operation of the softkeys described here, the active program is influenced.
Sequence of operation
PROGRAM
CONTROL
((Bild 810T/43 einmontieren))
By operating any of the 5 softkeys, you can now change over the preset "NO" to "YES". A
function marked with "YES" is active.
SKIP BLOCK
YES-NO
Display:
Blocks in the program which are marked with an oblique before the block number
("/ N ...") are skipped.
3-94
Operate the "PROGRAM CONTROL" softkey in the
"AUTOMATIC" or "MDI AUTOMATIC"operating mode.
You select, for example, the "SKIP BLOCK" softkey function .
Skip block
© Siemens AG 1990 All Rights Reserved
This CRT display with a menu of 5
functions appears.
YES
6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)
09.91