Siemens Sinumerik 810T User Manual page 157

11.90
Insert word
1 5
7
F J
X
Modify word
2 5
7
D J
X
Delete word
7
X
Insert block
..................
N 5 LF
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810T, GA3 (BN)
3.1.12 Program correction ("EDIT"): Insert/modify/delete word, insert/delete block
Using the cursor keys, set the cursor,
marked in inverse video, in front of
the point to be edited.
Enter the address and the new value
("X15" in example) and store it using the
input key.
Enter the address of word and the new
value ("X25" in example) and press the
"Modify word" key.
Enter the address of word to be deleted
("X" in example) and press the "Delete
word/block" key.
Position the cursor in front of the
block which will follow the inserted
block (in the example a new block will be
inserted in front of block "N5").
6ZB5 410-0EP02
3 Operating Sequences
3-55