Siemens Sinumerik 810T User Manual page 297

7 Interfacing to the Machine
7.3.3 Machine data bits
Sequence of operation: calling machine data bits
Sequence of operation as in the Section 7.3.1 for calling "General machine data", up to
operating the "NC MACHINE DATA" softkey, and then ...
MACHINE
BITS
The "Machine data bits" display appears.
... ...
• • •
The machine data searched for and the bit pattern stored in the control are displayed marked
in inverse video.
You can also use the cursor keys
or
the "Page Up/Down" keys call further machine data.
or
Please consult the machine tool manufacturer's documentation for the
setting and significance of the individual machine data bits.
7-8
... operate the "MACHINE DATA BITS" softkey.
Using the keyboard, now enter the number of the
desired machine data and operate the search key.
© Siemens AG 1990 All Rights Reserved
01.93
6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)